OC1 Chain Cleaner- "For a sparkling clean chain!"
- Thorough cleaning: Removes dirt, dried-on grease and residues of earth and sand.
- Versatile: For cleaning chains without O-rings, with O-rings, Z-rings, X-rings.
- Universal use: ideal for motorcycles, bicycles, ATVs, go-karts and all chain-driven vehicles.
OC1 Chain Cleaner is your ultimate partner for a clean and well-maintained chain.
The OC1 chain cleaner is a cleaning product specially developed for chains that thoroughly removes dirt, dried grease and residues of earth and sand. It is ideal for cleaning chains without O-rings, with O-rings, Z-rings, X-rings and is ideal for motorcycles, bicycles, ATVs, go-karts and all chain-driven vehicles.
OC1 Chain Cleaner allows your chain to be thoroughly and effectively cleaned, extending its life and performance. It's easy to use and gives great results by ridding your chain of dirt and debris.
Whether you own a motorcycle, bicycle, ATV, go-kart or other chain-driven vehicle, the OC1 Chain Cleaner is the ideal cleaner for your chain and other moving parts.
Trust the guaranteed quality and efficiency of the OC1 chain cleaner and experience the difference of a clean and well-maintained chain!
- Can be used for cleaning O-ring, O-ring, Z-ring, and X-ring chains
Copes well with stubborn dirt, including dried grease, soil, sand residues, and dust formed as a result of abrasion of blocks and baked dirt
Does not leave any traces or stains
Effectively cleans and maintains bicycle chains
Immediately degreases the chain, making it easier to clean
Must-have equipment for home bicycle workshops
Perfect for use on motorcycles, bicycles, ATVs, go-karts, and all chain-driven vehicles
Removes all deposits from asphalt and tar, as well as dust formed as a result of abrasion of blocks and baked dirt
Removes brake fluid, oil, and grease, making it easier to repair and fit parts
Restores the drive to full efficiency and extends the life of the chain
Safe to use, as it does not contain chlorinated solvents
Strong power aerosol making it easy to clean even hard-to-reach areas
- 0,5 L
Here are the instructions for using the Chain Cleaner product:
- Shake the can well before use.
- Spray the Chain Cleaner on the entire length of the chain.
- Leave the Chain Cleaner on the chain for 5 minutes to allow it to penetrate and dissolve the dirt and grime.
- If the chain is very dirty, use a non-abrasive brush to scrub the chain gently to remove any stubborn dirt and grime.
- Spray the Chain Cleaner on the chain again and leave it on for another 5 minutes.
- Wipe off the excess Chain Cleaner using a clean cloth.
- Allow the chain to dry completely before applying any lubricant.
- After the chain has dried, apply OC1 Chain Lube or another suitable lubricant to the chain to prevent corrosion and provide proper lubrication.
Note: Avoid spraying the Chain Cleaner on other parts of the bike, especially the brakes, as it can cause damage.