OC1 air filter oil

"High quality lubricant for improved performance and protection"

OC1 Air Filter Oil is a premium quality lubricant specially formulated for foam air filters on off-road bikes and ATVs. Its special formula guarantees complete protection for all types of foam filters and ensures maximum engine performance and durability.

This blue colored air filter oil is water resistant and efficiently retains dust, mud and sand. It is designed to extend engine life. The limited loss of load on the air intake improves engine performance, while the anti-clog formula prevents clogging. The formula also prevents water from entering the filter when crossing fords.

One of the main advantages of OC1 air filter oil is its fast drying time. So you don't have to wait long before you can reassemble the filter. Its low viscosity and super sticky formula easily penetrates the filter and maximizes airflow, which in turn increases performance.

Additionally, the proprietary formulation contains polymeric additives that provide a hyper-tacky surface to resist flying sand, dust, water, mud and dirt. This helps ensure your engine is protected, even in the harshest of conditions.

OC1 air filter oil is naturally biodegradable and therefore environmentally friendly. It is also non-chlorinated, which reduces the risk of pollution.

Application Notes:

• Remove the air filter from your motorcycle or ATV.
• Clean the air filter with the OC1 Air Filter Cleaner according to the label instructions.
• Shake the bottle of OC1 Air Filter Oil well before use to activate the formula.
• Wearing shop gloves, pour enough air filter oil into a pan to completely submerge the filter, or apply up to 100ml of oil and massage into the filter.
• Make sure the entire filter is coated with oil both inside and out. The blue coloring helps to easily identify the protected areas.
• Gently squeeze out excess oil.
• Leave the filter for 10 minutes to allow the oil to evaporate and penetrate the filter.
• Gently squeeze the filter to remove excess oil.
• Lubricate the edge of the filter and the inside of the air filter box for improved air filtration efficiency.
• Install the air filter in the air filter box and start the engine.

Note: OC1 Air Filter Oil is a water resistant product making it ideal for off-road vehicles exposed to dirt, dust and water. It is recommended to use OC1 Air Filter Cleaner before applying the oil to ensure the best protection for your engine.