OC1 Offroad Cleaner 950 ml - "For effective and safe cleaning!"
incl. VAT plus shipping costs
Characteristics:
- Specially developed: For off-road motorcycles and MTB bikes.
- Tested under the toughest conditions: by European motocross riders, including the well-known and successful German MX-GP rider Max Nagl.
- Effective cleaning: Safely, powerfully and effectively cleans all surfaces of off-road motorcycles and MTB bikes without attacking them.
- Environmentally friendly: The formula is based on the latest findings from the chemical industry and is environmentally friendly.
OC1-Offroad Cleaner 950 ml is your ideal partner for cleaning and caring for off-road motorcycles and MTB bikes.
Menge
The OC1 Offroad Cleaner 950 ml is a high-performance cleaner that was specially developed for off-road motorcycles and MTB bikes. OC1 was developed and tested under the toughest conditions by European motocross riders, including the well-known and successful German MX-GP rider Max Nagl.
The OC1 formula is based on the latest findings from the chemical industry, thanks to which OC1 cleans all surfaces of off-road motorcycles and MTB bikes safely, powerfully, effectively and in an environmentally friendly manner without attacking them. The product is ready to use and should be used without dilution.
Application:
The product is ready to use. Use without dilution. Rinse surfaces with water. Apply to the dirty surface with a sprayer and rinse with water after 1-2 minutes. Use a brush in hard-to-reach places. Note: Do not use the product on hot surfaces.
- Features
- Disc brake rotor and pad friendly
Environmentally friendly
Features revolutionary Nano Technology that breaks down dirt and grime on a microscopic level
Provides added protection and care for your off-road vehicle, ensuring it looks as good as new
Removes mud, grime, and oily dirt instantly
Safe for use on all surfaces, including carbon fiber, anodized metal, rubber, and plastic
Specially formulated for off-road vehicles, including motorcycles, MTB bikes, and quads
Uses high-quality surfactants and ingredients for unmatched performance and cleaning power - Capacity
- 0,95 L
Thank you for choosing OC1 Offroad Cleaner, the ultimate solution for cleaning and caring for your motorcycle, quad, or off-road vehicle. This manual will guide you on how to use our powerful ecological cleaner to achieve the best cleaning results for your bike.
- Rinse: Start by rinsing your motorcycle, quad, or off-road vehicle thoroughly with water to remove any loose dirt or debris. This will help to avoid any scratches or damage during the cleaning process.
- Spray: Spray the OC1 Offroad Cleaner generously all over the surface of your bike, ensuring to cover all areas, including components.
- Wait: Allow the product to work for 1-2 minutes, depending on the level of dirt or grime on your bike. This will give the product enough time to penetrate and break down any stubborn dirt.
- Agitate: For any stubborn grime or mud, use a brush or sponge to agitate the surface and help to loosen the dirt. This will ensure a thorough cleaning of your bike.
- Rinse: Rinse off the entire bike thoroughly with fresh, clean water. Use low or high-pressure water depending on your preference. It is recommended to rinse before the product dries to ensure maximum effectiveness.
- Dry: Allow the bike to dry naturally or wipe it down with a microfiber cloth to achieve a perfect finish. Do not use on heated surfaces or under direct sunlight.
Usage:
The OC1 Offroad Cleaner is ready to use, so do not dilute it. Apply the preparation to the cleaned surface and wait for 1-2 minutes. Then wash off with low or high-pressure water. Allow the surface to dry or wipe it with a microfiber cloth.
With the OC1 Offroad Cleaner, cleaning your motorcycle, quad, or off-road vehicle has never been easier. Say goodbye to stubborn dirt, mud, and grime, and achieve a perfect finish every time. Keep your bike in top condition with the ultimate cleaning solution from OC1.