Product added to cart
Cleaner & Lube Bundle
Special Price €30.00 Regular Price €44.75
In stock
SKU
D100/009
Lowest price in last 30 days: €30.00
Complete drivetrain care for every weather condition
An advanced OC1 set for comprehensive bicycle care in all weather conditions. Full bicycle washing, dry lubrication for fair weather and wet-condition lubrication – one set prepared for the entire season, from dry tarmac to muddy forest trails.
- Bicycle Cleaner 950 ml – a high-performance cleaner for the entire bicycle. Effectively removes road dirt, oil stains and insect marks. For washing the whole bicycle.
- Chain Lube Dry 140 ml – a synthetic lubricant for dry conditions. Penetrates deep into the chain structure, displaces moisture and ensures smooth drivetrain performance with minimal dirt build-up.
- Chain Lube Wet 140 ml – a synthetic lubricant enriched with water-resistance additives. Maintains its consistency even under intense contact with water and mud – ideal for riding in the rain.
Drivetrain Bundle Previous 
Everything for your drivetrain in any weather – one bundle for the whole season
Dry asphalt in July and muddy forest trails in November call for different lubes, but the same clean bike. The OC1 Cleaner & Lube Bundle covers both: you get a cleaner for the whole bike, a lube for fair weather and a lube for riding in the rain.
The bundle contains three products: Bicycle Cleaner 950 ml, Chain Lube Dry 140 ml and Chain Lube Wet 140 ml. Instead of buying another lube when the weather changes, you have both at hand – after washing your bike you pick the one that suits today's ride.
What is in the bundle?
One cleaner and two lubes for different conditions:
- Bicycle Cleaner 950 ml – a high-performance cleaner for the whole bike with a 2-in-1 trigger (foam or stream). Nanotechnology breaks dirt down from the inside, so there is no need to scrub. It removes road dirt, oil stains and insect marks, and is intended for paint, carbon, aluminium, plastic and rubber when used as instructed; rinse brake discs and pads with water after washing.
- Chain Lube Dry 140 ml – a synthetic lube for dry, dusty conditions. It reduces wear, penetrates deep into the chain structure, displaces moisture and protects against corrosion. It does not leave a sticky surface, so it picks up minimal dirt.
- Chain Lube Wet 140 ml – a synthetic lube with hydrophobic additives that keeps its consistency even after contact with a lot of water. It is resistant to wash-out and intended for chains with O-ring and X-ring seals.
Who is this bundle for and which lube should you use when?
This bundle is for cyclists who ride all season – on the road, gravel and off-road – and do not want to skip a ride because of the weather. Washing the whole bike takes a few minutes, and the pair of lubes takes care of your drivetrain for many rides.
Choose Chain Lube Dry for dry, dusty trails, riding on asphalt, training in dry climates and always after washing the bike and drying the chain. The formula does not collect dust and sand, so the chain stays cleaner.
Choose Chain Lube Wet for riding in the rain, muddy and wet forest trails, long rides, crossing fords, puddles and streams, and for autumn and winter, when moisture and rust show up fastest. Even complete submersion of the chain does not strip its lubrication.
Bicycle Cleaner on its own is for everyone who looks after their bike: MTB riders will appreciate how quickly it deals with mud, sand and forest grime without damaging delicate components, road cyclists get peace of mind that the formula will not harm paint or carbon, and city riders and commuters save time – instead of an hour in the garage, 3 minutes is enough, and it effectively removes road salt too. It is also useful for getting ready for the season after a winter break.
How to use the bundle – step by step
The post-ride routine is always the same, only the choice of lube changes:
- 1. Wash the bike – spray the frame, wheels and drivetrain with Bicycle Cleaner, wait a moment and rinse. The whole job takes about 3 minutes.
- 2. Dry the chain and choose a lube – Chain Lube Dry for fair weather, Chain Lube Wet for rain and mud. Apply the lube to a clean, dry chain.
- 3. Hit the trail – Wet keeps protecting in puddles and on wet roads, and Dry keeps the chain clean on a dry trail.
| EAN | 4262353191170 |
|---|---|
| Application | Bicycle, Trial, MTB |
| Purpose | Cleaning, Lubrication |
| Suitable for | Plastic, Chain, Tyres, Rims, Metal parts |
| Package dimensions | 15.88 × 8.46 × 23.43 cm |
Related Products
We found other products you might like!
