Product added to cart
OC1 Lens Cleaner 100ml
€10.00
In stock
SKU
A176/001
Price per 100 ml: €10.00
Cleans visors without streaks.
Lens Cleaner visor cleaning agent is an alcohol-free product with a near-neutral pH that effectively removes dirt, greasy stains and fingerprints from helmet visors and glasses. The formula with deionised water leaves an electrostatic layer that reduces re-soiling and protects against streaks. Thanks to its pleasant scent and gentle formula, you can clean your visor several times a day without worrying about damaging protective coatings.
- Alcohol-free
- Near-neutral pH
- Electrostatic layer
- Pleasant scent
- Universal application
OC1 Chain Cleaner 500ml Previous 
Crystal clear view in all conditions
You don't need to be a chemistry expert to care for your visor. Lens Cleaner visor cleaning agent is a product created for everyone — from weekend motorcyclists to professional competitors who need a crystal clear view in all conditions. The alcohol-free formula safely removes dirt, greasy stains, insect residue and fingerprints without damaging delicate protective coatings on the visor.
This is a product that works quickly and effectively, saving your time and protecting your investment in a high-quality helmet. Thanks to the use of deionised water — in accordance with recommendations from many helmet manufacturers — you can be sure you won't leave mineral deposits or streaks on the visor.
Main properties of the product
What makes Lens Cleaner visor cleaning fluid stand out from other products? It's the combination of professional effectiveness with absolute safety for the user and equipment.
- Alcohol-free formula - suitable for frequent cleaning of visors, including tinted ones and those with an anti-fog coating; it can be used even several times a day.
- Near-neutral pH - a pH of around 7.5 and an alcohol-free formula make it suitable for frequent cleaning of glasses and goggles.
- Deionised water – highest quality mineral-free water that leaves no limescale deposits or streaks, in accordance with recommendations from helmet manufacturers such as Shoei, AGV or Arai.
- Electrostatic layer – unique formula ingredient creates an invisible coating that repels dust and fine contaminants, keeping the visor clean much longer.
- Universal application – safe for polycarbonate, PMMA and all other materials used in production of motorcycle, cycling, ski and snowboard visors.
When to use visor cleaning fluid?
Regular visor cleaning is the foundation of safe riding and user comfort. Lens Cleaner works well in many situations when you need to quickly restore a crystal clear view. Before every ride it's worth checking the visor condition and using the product if needed — just a few seconds is enough to remove dust, pollen or minor dirt that can limit visibility, especially when riding into the sun.
After riding in rain or through puddles the visor often gets covered with streaks and mineral deposits from road water — the cleaning agent effectively eliminates these problems, leaving the surface streak-free and protecting it with an electrostatic layer.
Why is an alcohol-free formula important?
The alcohol-free formula is suitable for frequent, even daily cleaning of visors, goggles and glasses, including those with delicate mirrored and tinted coatings.
To protect the visor from fogging, use the separate OC1 Anti Fog, applied to the cleaned surface. If the visor has a factory anti-fog coating or insert, follow the instructions of its manufacturer.
Professional quality, accessible to everyone
Lens Cleaner is a product made in Germany according to the highest quality standards. Used by professional motorcycle and cycling competitors, but designed for all users — from beginners to experienced motorcyclists and cyclists. The OC1 brand has many years of experience in creating care products for two-wheeled vehicles.
As the official technical partner of MXGP teams and many professional competitors, we know exactly what people demanding the highest quality and reliability need. By choosing Lens Cleaner, you choose a product tested in the toughest conditions by professionals, yet so easy to use that you'll manage it on your first try.
| EAN | 4262353190333 |
|---|---|
| Application | Motorcycle, Motocross, Enduro, Speedway, Road, Quad, Bicycle, Trial, MTB |
| Purpose | Cleaning |
| Suitable for | Helmet, Visor |
| Key Features | Alcohol-free formula, near-neutral pH, contains deionised water recommended by helmet manufacturers, leaves no streaks or fingerprints, for frequent cleaning of visors and glasses, creates an electrostatic layer |
| Benefits | Effectively removes fingerprints, greasy stains, dirt, dust, insect residue and contamination from all lens types, safe for delicate anti-fog and tinted coatings, doesn't dry out helmet seals, pleasant scent |
| What problem does it solve? | Eliminates streaks and dirt from helmet visors and glasses without risk of damaging protective coatings, provides crystal clear view increasing riding safety, protects against rapid re-soiling thanks to electrostatic layer |
| Context of use | Daily commuting, amateur rides, off-road riding, long motorcycle trips, motocross training and competitions, MTB, enduro, riding in various weather conditions (rain, dust, mud), weekend trips, professional sports training |
| Application Form | Atomizer |
| Formula | Ready to use / does not require dilution |
| Product Form | Liquid |
| Capacity (litre) | 0.10 |
| Efficiency | 100 ml package is enough for dozens of full cleanings of motorcycle visor or cycling glasses, depending on dirt level and size of cleaned surface |
| Application Temperature | Apply at temperatures between 5°C and 25°C |
| Storage Temperature | Store at temperatures between 5°C and 30°C |
| Made in | Germany |
| Package dimensions | 4.4 × 4.4 × 12 cm |
1. Shake the bottle
Shake the bottle well before use so all active ingredients mix evenly. This simple step ensures optimal product performance and even distribution of the product across the entire visor surface.
2. Spray the visor
Spray Lens Cleaner directly onto the visor, glasses or goggles. You don't need to save the product — use as much as needed to cover the entire surface requiring cleaning. The product is very efficient, and the 100 ml package lasts for many applications.
3. Wipe with a soft cloth
Use a clean microfibre cloth or soft paper to gently wipe and remove all dirt. Circular motion or top-to-bottom works best. Don't scrub intensively — Lens Cleaner breaks down dirt at the microscopic level, so gentle wiping is fully sufficient.
4. Repeat if necessary
If the visor was very dirty or covered with stubborn stains (e.g. greasy insect residue), you can repeat the process. The product is safe for multiple use, so you don't need to save it when dealing with tough dirt.
5. Leave to dry or wipe
Leave the visor to dry naturally, which takes just a few seconds, or use a clean, dry microfibre cloth to speed up the process. The electrostatic layer will remain on the surface, protecting against re-soiling.
Important
Avoid using on very hot surfaces immediately after riding and on very cold surfaces in winter conditions — it's best to clean the visor indoors at room temperature. Lens Cleaner is not intended for cleaning the inner side of the visor — use it only on the outer surface. Store the product at 5–25 °C, away from direct sunlight.
Tip
For best results, always use a clean microfibre cloth. A dirty cloth can scratch the visor regardless of cleaning product quality. It's worth having several clean cloths with you on longer routes. If you ride regularly in difficult off-road conditions, it's worth cleaning the visor daily — it will take you a few dozen seconds, but will significantly extend visor lifespan and improve riding safety. You can also use Lens Cleaner to clean motorcycle mirrors, navigation screens or helmet displays — the product is universal and safe for all types of lenses and displays.
Is Lens Cleaner safe for visors with anti-fog coating?
Lens Cleaner contains no alcohol and is designed for frequent cleaning of visors, including those with anti-fog coatings. Factory anti-fog coatings and inserts differ between manufacturers, so it is worth checking the recommendations of the helmet or visor manufacturer.
How often can I use Lens Cleaner on my visor?
You can use the product as often as you need — even several times a day. The formula is gentle and safe for multiple use, doesn't dry out seals or damage protective coatings. Many professional competitors clean visors and goggles after every training or competition, and Lens Cleaner works perfectly for such intensive use.
Does the product work on tinted and mirrored visors?
Absolutely yes. Lens Cleaner visor cleaning fluid is safe and effective on all visor types — clear, tinted, metallised (mirrored) and photochromatic. The formula with deionised water leaves no streaks or mineral deposits, which is particularly important for mirrored visors where every streak is more visible.
Can Lens Cleaner visor cleaning product cause allergies?
The product is not classified as hazardous and contains no alcohol. It does contain a fragrance, so people who are allergic to fragrances should avoid skin contact and apply it to a cloth rather than directly to their hands.
How many cleanings can I do with one 100 ml bottle?
The 100 ml package is very efficient and lasts for many dozens of cleanings, depending on dirt level and size of cleaned surface. With typical use (cleaning motorcycle visor or cycling glasses) one bottle should last an entire riding season with regular use. It's an ideal package for carrying in a pannier, backpack or saddle bag.
Can I use Lens Cleaner to clean prescription glasses?
Yes, the product is a universal product that works excellently for cleaning prescription glasses, including lenses with anti-reflective and anti-scratch coatings. The alcohol-free formula is safe for all types of eyeglass lenses, including those made from polycarbonate or high-index organic materials.
At what temperature should I store Lens Cleaner?
The visor cleaning product should be stored at 5–25 °C, away from direct sunlight and heat sources. Avoid freezing the product and storing at very high temperatures (e.g. in a motorcycle trunk during heat waves), as this may affect formula effectiveness. Under normal storage conditions the product maintains full effectiveness for a long time.
Does Lens Cleaner visor cleaning fluid leave streaks?
No, the cleaning agent was designed specifically to leave no streaks. The use of deionised water and special active ingredients ensures a crystal clear effect without streaks, fingerprints or deposits. If you notice streaks, it may be caused by using a dirty cloth — always use a clean microfibre for best results.
What is an electrostatic layer and how does it work?
The electrostatic layer is an invisible protective coating that forms on the visor surface after the cleaning product dries. It works by repelling electrostatically charged dust particles and fine contaminants, which keeps the visor clean much longer after cleaning. This solution is especially appreciated by people riding daily in dusty urban conditions or on gravel roads.
Can I use Lens Cleaner to clean motorcycle mirrors?
Yes, the product works great for cleaning motorcycle mirrors. It is safe for all types of mirror surfaces, including those with anti-reflective coatings or heating. The product quickly removes insect residue, road dirt and greasy stains, leaving a crystal clear surface without streaks.
Does the visor cleaning fluid work on heavily soiled goggles after mud riding?
Yes, the cleaning agent effectively removes even stubborn dirt, including mud, dust and insect residue. For very heavy soiling we recommend repeating the cleaning process 2–3 times, using a fresh cloth for each attempt. The product formula breaks down dirt at the microscopic level, making it easier to remove even the toughest dirt without intensive scrubbing.
Can I use Lens Cleaner visor cleaning product on the inner side of the visor?
The cleaning agent is designed mainly for cleaning the outer surface of visors and glasses. If you want to use it for cleaning the inner side of the visor, remember to thoroughly wipe off the product so as not to leave excess fluid that could cause fogging while riding. For the inner side of the visor, dry wiping with a soft cloth is often sufficient.
Signal word
None (product not classified as hazardous)
Precautionary statements
No P statements.
Warnings
This product is not classified as hazardous in accordance with Regulation (EC) No 1272/2008.
Warning pictograms
No warning pictograms.
Hazard statements
No hazard statements.
Composition
Fragrance compositions
Related Products
We found other products you might like!
