Product added to cart
OC1 Anti fog 100ml
€10.00
In stock
SKU
A177/001
Price per 100 ml: €10.00
Effectively protects visors against fogging
Highly efficient OC1 Anti Fog is a simple solution to the problem of fogged visors and eyeglass lenses. Simply spray, wipe and done – clear vision for several days, regardless of conditions. For polycarbonate, acrylic and glass visors, goggles and glasses, including tinted and anti-reflective lenses.
- Long-lasting protection
- Universal application
- Safe for optical surfaces
- Hydrophobic properties
OC1 Bike Shine 500ml Previous 
Clear view without fogged visors
A fogged visor at a crucial moment during a ride is not just discomfort – it's a safety hazard. OC1 Anti Fog was created to ensure clear visibility regardless of conditions. A product used by motocross riders during MXGP races, now available to anyone who values safety and riding comfort.
The anti-fog visor product works at a microscopic level, creating an invisible coating that effectively prevents water vapour condensation on visors and eyeglass lenses. You don't need to be an expert to use it – application takes literally half a minute, and the effect lasts for several days.
Key properties of Anti Fog
What makes Anti Fog stand out among other anti-fog products?
- Long-lasting formula – one application lasts up to five days of intensive use.
- Thin protective coating – creates an invisible barrier preventing fogging without affecting visual clarity.
- Hydrophobic action – not only prevents fogging but also repels rain drops and moisture.
- Safe for surfaces – can be used on polycarbonate, acrylic and glass visors and eyeglass lenses. For visors with a factory anti-fog coating, follow the instructions of their manufacturer.
- Fast drying – the formula dries almost instantly, after just one minute you can put on your helmet and hit the road.
Who is Anti Fog for?
Are you a motocross competitor or amateur racer? Anti-fog product is an essential part of equipment preparation before every competition. Clear vision at crucial moments of the race can determine the result.
Do you ride a bicycle or motorcycle recreationally? Fogged glasses during a descent or a leisurely ride on cool mornings is an annoyance that's easy to eliminate. One application gives peace of mind for an entire week. Do you dive or swim with goggles? The product works excellently on diving masks, eliminating the problem of fogged lenses underwater.
Do you work in conditions where you wear safety glasses? In workshops, on construction sites or in laboratories, fogged glasses are not just discomfort but also a hazard. Do you drive in rain and have problems with fogging windows? The product also works on car windows, improving visibility in difficult conditions.
When to use Anti Fog?
The product works in any situation where moisture and temperature can cause surface fogging.
- When riding in rain – heavy rainfall creates ideal conditions for visor fogging from inside, the product eliminates this problem at the source.
- On cool mornings – large temperature difference between body and surroundings causes rapid condensation, which one application effectively blocks.
- During intense exertion – rapid breathing during strenuous riding generates additional water vapour, which the product effectively handles.
- At races and training – in stressful sporting situations you cannot afford visibility problems.
- When skiing or snowboarding – winter sports create ideal conditions for goggle fogging, the product ensures a clear view of the slope all day.
How does the Anti Fog formula work?
The secret lies in advanced moisture absorption technology. Classic anti-fog products often work for a few hours and require frequent application – OC1 Anti Fog visor product works differently.
The formula creates a micro-thin coating on the surface that modifies surface tension. Instead of gathering into tiny droplets (which cause the fogging effect), water spreads into an even, invisible layer. You can see through it without any problem.
Moreover, the coating has hydrophobic properties – rain drops and moisture don't settle on the surface but run off. This is double protection – against fogging from inside and moisture settling from outside. Thanks to the durable formula, you don't need to apply the product daily – one application lasts several days of regular use, even in difficult conditions.
| EAN | 4262353190340 |
|---|---|
| Application | Motorcycle, Motocross, Enduro, Speedway, Road, Quad, Bicycle, Trial, MTB |
| Purpose | Protection |
| Suitable for | Helmet, Visor |
| Key Features | Prevents fogging of visors, goggles and eyeglass lenses, creates a micro-thin protective coating, works for up to 5 days, fast drying, for polycarbonate, acrylic and glass visors and lenses |
| Benefits | Clear vision in all conditions, repels moisture and rain drops, long-lasting protection without frequent application, safe for anti-reflective and tinted coatings, leaves no streaks or sticky residue |
| What problem does it solve? | Eliminates fogging of visors, goggles and eyeglass lenses, improves riding safety through better visibility, removes discomfort caused by fogged optics, protects against water vapour condensation in changing temperature conditions |
| Context of use | Riding in rain, snow or high humidity, cool mornings with large temperature differences, intense physical exertion generating water vapour, motocross races and training, winter sports, diving, work with safety glasses |
| Application Form | Atomizer (2-in-1 foam/liquid) |
| Formula | Ready to use / does not require dilution |
| Product Form | Liquid |
| Capacity (litre) | 0.10 |
| Efficiency | Approx. 30–50 applications per bottle |
| Application Temperature | Apply at temperatures between 5°C and 25°C, Do not apply to hot surfaces |
| Storage Temperature | Store at temperatures between 5°C and 30°C |
| Made in | Germany |
| Package dimensions | 4.4 × 4.4 × 12 cm |
1. Clean the surface
Before application, ensure the visor or eyeglass lenses are clean and dry. Remove dust, dirt and fingerprints. You can use OC1 Lens Cleaner for thorough cleaning.
2. Shake the bottle
Shake the bottle well before use to distribute the ingredients evenly. This will ensure optimal formula performance.
3. Spray the product
Apply a small amount of product to the surface you want to protect. You don't need to use much – a thin layer is sufficient and most effective.
4. Spread evenly
Use a clean microfibre cloth to spread the product evenly across the entire surface. Try to cover every area – this is crucial for effectiveness.
5. Allow to dry
Wait a few minutes for the solution to dry. The formula dries quickly, creating an invisible protective coating. After just one minute you can use your equipment.
6. Buff off excess
If you notice any streaks or excess product, gently buff the surface with a clean, dry microfibre cloth until you achieve a crystal-clear finish.
Important
Safety – avoid getting the product in your eyes. If this occurs, rinse eyes with plenty of water and consult a doctor if necessary. Storage temperature – store the product at 5 to 25°C, away from direct sunlight and heat sources. Children – keep the product out of reach of children. Testing – when using for the first time on a new type of visor or glasses, test the product on a small, inconspicuous area to ensure everything works properly.
Tip
Application frequency – for best results, apply the product every 3–5 days or after each thorough visor/goggle cleaning. In very difficult conditions (heavy rain, large temperature differences) you can apply more frequently. Optimal conditions – best results are achieved by applying the product at room temperature on dry surfaces. Avoid application on wet or hot visors. Combination with other products – works great with OC1 Lens Cleaner. First clean the visor thoroughly with Lens Cleaner, then protect with Anti Fog. This combination delivers excellent results.
How long does OC1 Anti Fog protection last?
Anti-fog protection lasts up to five days with regular use. In extreme conditions (very intensive use, frequent washing) earlier reapplication may be needed.
Can I use Anti Fog on prescription glasses?
Yes, the product is safe for all types of prescription lenses, including those with anti-reflective coatings, tinted and photochromic. It does not damage delicate coatings.
Does Anti Fog work on car windows?
Yes, you can use the product on car windows to prevent fogging and improve visibility in rain. It works great on windscreens and side mirrors.
Is the visor slippery or sticky after application?
No, after drying the product leaves no sticky residue or slipperiness. The surface remains natural to the touch and the coating is completely invisible.
How many applications can I get from one 100 ml bottle?
From a 100 ml bottle you can get 30 to 50 applications depending on surface area and amount of product used. This is a very efficient product – you really need only a small amount.
Does Anti Fog damage anti-reflective coatings?
The product is intended for polycarbonate, acrylic and glass visors, goggles and glasses, including those with an anti-reflective coating. The product contains alcohol (propan-2-ol), which can damage some factory anti-fog coatings, so for visors and goggles with such a coating or insert follow the instructions of their manufacturer. When using it on a new type of lens for the first time, test it on a small, inconspicuous area.
What should I do if streaks are visible after application?
Streaks usually mean too much product was used. Buff the surface with a dry microfibre cloth. For the next application, use less product and spread it thoroughly across the surface.
Can I use Anti Fog on a wet visor?
For best results, apply the product on a dry surface. If the visor is wet, dry it first with a cloth, then apply the product.
Does the product work in extremely cold conditions?
Yes, the formula works effectively even at low temperatures. It's an ideal product for winter sports, where the fogging problem is particularly troublesome.
How often should I use Anti Fog?
We recommend application every 3–5 days or after each thorough visor cleaning. If you notice the effect weakening earlier, you can apply more frequently.
Do I need to use other care products after using Anti Fog?
No, Anti Fog works independently. However, for comprehensive care you can use OC1 Lens Cleaner for cleaning before application – this will give the best results.
What should I do if the product gets in my eyes?
Immediately rinse eyes with plenty of clean water for at least 15 minutes. If irritation persists, consult a doctor. The product is not intended for contact with eyes.
Signal word
Warning
Precautionary statements
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 Use only outdoors or in a well-ventilated area.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/attention.
Warnings
Before use, read the safety data sheet for the hazardous chemical mixture.
Warning pictograms
Hazard statements
H226 Flammable liquid and vapour.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
Composition
Propan-2-ol; <5% non-ionic surfactants
Related Products
We found other products you might like!
